|
Aloha All,
First of all I wanted to thank KOKONUT JOE for helping me
out on the drill, bits, and a lil info. Not to forget a shout out to Mel, edselhead on some tips. Thanks guys, and now for
the show.
Here's the tool. You can find this drill @ Sears. The bits are made by Mascot from Germany
and the size I use are #72 for 30g wire.
The motor is out, and I started drilling out the holes for the
sparkplug wires. When you
use this type of bit and drill be very
careful not to apply a lot of pressure as the bit is thin and will
fold on
you.
The wire is in and on way to the makeshift distributor.
All Pau, if you look good to the right of the motor bay you will see that I wired the battery
.I had removed the Turbo so I could get an open space for the battery wires. Dont worry in the pictures the wires look too
big for the motor, but in person they look great.
Here's the finished pic as the motor is back into the Muscle Machine Tuner. I also had filed
down the notches that hold the wheel axles to give the Tuner a lower look.
Have Fun Guys and Gals and if you need more help PLEASE email us at GSKustoms@aol.com
|
